Showing posts with label Iron Buddy. Show all posts
Showing posts with label Iron Buddy. Show all posts

Tuesday, February 1, 2011

Remiss Resolutions

Okay, I have been a bad blogger and have not posted in 2 months. I have absolutely now excuse for the first month, although, I suppose I could try the old "Hey, it was the holiday season" ploy.
Nah, I'll just take responsibility for my lack of action.

Now, I do have a couple of good excuses for the second month. Here they are:


On the left is Lucius and on the right is Serenity. They are my grandtwins. My daughter and her husband moved in with my wife and I after finding out that they were having the twins. They were born on 1/12.

I expect that the picture above will be re-enacted multiple times over the coming years. Lucius shaking his fist and Serenity yawning at him. What do you think?

So, on to my 2011 scooter resolutions. Above is my current stable of scooters. The nearest is my newest bike, a SYM RV 250. I'm still getting used to it and have only put about 500 miles on it thus far. Behind that is the Genuine Stella. Just beyond that, partially covered is Iron Buddy.

Having added a 3rd scooter at the very end of 2010, I do not resolve to add another scooter to the current herd. I do love to ride so most of my resolutions will involve putting more miles on the scoots.

Today, 2/1, I went out and photographed the odometers of each bike. Above, Iron Buddy has 20,855 miles. I resolve to have more than 24k miles on I.B. by the end of the year.
I turned over 10k miles on the Stella on 1/12 and have added another 71 miles on her. I resolve to have 14.5k miles miles on her by 2011's end.
The '08 RV250 have a whopping 2,383 miles as of this morning. (I bought it with 1900 miles on the odo.) I resolve to have in excess of 7000 miles showing by the end of the year. I am, therefor, resolving to ride a minimum of (hmm, let's see carry the one, cross multiply, add the square root of pie..... ) 12,191 miles. That seem like a good distance to attempt.

Here's another pic of the RV250. They are pretty bikes. I'm getting 65mpg and have gotten it up to 80mph (indicated) with no difficulty at all. That gives me a 200 mile range and I can travel interstates without too much difficulty. All things considered, though, I still prefer my small wheeled scooters.

I also resolve to do my part to help this year's Sky Island Riders' rally to be our best yet. (It's only our second, so I'm not setting the bar too high.)

I further resolve to design and build a scooter theme rocking toy for the twins to ride when they are ready for it.

Ride on,

Howard

Tuesday, November 9, 2010

Fall Classic Frenzy

This past Friday and Saturday I attended my 5th scooter rally of 2010. For someone who has said he's not really into rallies, I sure went to a lot of them. Well, five seems like a lot to me. I went to one two years ago and two last year.

This one was the Fall Classic, aka the Tucson-Nogales Rally. This it's 23rd year which, I'm told, makes it one of the nation's longest running rallies. It is a weekend "camping rally." For many years the rally started with a Meet & Greet at the historic Hotel Congress in downtown Tucson. Due, in part, to recent renovations, there is no longer as much room for scooters as in the past, so it was moved to "The Hut."

The Hut, obviously, is a tiki-themed bar on 4th Ave. The giant tiki head was moved to here from a local miniature golf course that closed. I think it's an awesome addition. Additionally, it's quirky enough to make it a perfect venue for quirky scooterists, don't you think?

The 2008 Fall Classic was the first rally I ever attended. I enjoyed looking at all the scoots, but didn't really feel like a part of it. After almost 3 years of riding, I finally know enough other scooterists to feel more like a part of things. I've never had any desire to camp with the rally, but after feeling welcomed into "the fold," I may be willing to give it a try next year.

The meet and greet was great fun. We had some DJ's spinning classic northern soul music. Clubs from around the southwest were present. I got to meet some new people and see some scooter folk I hadn't seen in quite a while.

Saturday morning is when the "Nogales" part of the Tucson-Nogales Rally happens. Nogales, AZ is about 50 miles south of Tucson on I-19. Every year the rally makes that 50 miles into about 100 by riding east to Vail, then south, through Arizona wine country, to Sonoita, then back west to the campground. It is a beautiful ride and the weather was perfect. temps were in the upper 70's. But it was not to be a perfect ride for me. . . . . . . . (Insert suspenseful music here)

Iron Buddy and I set up to shoot a short video of the ride out from the Hut. I pulled into the rear of the group after they all passed me, then got stuck at a light. There were a couple of other lights that I got stopped at, so when I finally hit Aviation Parkway, I hammered the throttle to catch up. I had gone a mile or so and was just catching the back of the pack when my drive belt exploded and Iron Buddy and I coasted to a stop.

I figured my day and the rally were lost. The Scoot Over sag wagon pulled up and when they told me that they had no replacement belts on board, I knew I was done. As Jason pulled away, he told me the shop was open and to give Ron a call.

As I began pushing my poor scooter to a main street so that I could be found more easily, my phone rang. It was Ron, at Scoot Over. He told me not to worry and that they were sending the truck over to help me get back on the road. Huzzah!

Long story - short: I got picked up, got to the garage where we replaced the belt. We called and found out where the group was and I left trying to catch up. I didn't make it out of the parking lot and the rear wheel locked up. DRAT! Limped back to the garage where we found that my NCY performance clutch was jacked up. We replaced the clutch with a stock one and off I went again, almost an hour behind the pack.

The ride stops in Vail for 20-30 minutes, then again in Sonoita for 20-30 minutes before riding into the Campground near Nogales. I figured if I ran really hard, I might could catch the group at Sonoita. I rode the shortest way I knew and I actually caught them in Sonoita. It was a glorious sight when I topped the hill and saw all those beautiful scooters!

Unfortunately, they were pulling out just as I pulled in. I was hungry, thirsty and in need of fuel. I addressed all three areas and raced out of town. "I caught 'em once, I'll catch 'em again" i thought as I began to ride. And i did catch them about 10 miles outside of Nogales. I kept passing scooters until I caught up with John, who was riding my Stella (another story of broken scoots.) We rode together to the campground.

I was having a great time. There was the human taco (a Pharoes prospect)

Here's one of the "Rally Dogs." He came up with Jason in the SAG wagon.
Here's much of the camp as seen from the hill to the south.
Ahhh! the chuckwagon. This was the first year I hung out long enough to eat. It was pretty darned tasty.

After running WOT up I-19 for 45 miles, Sean's Riva finally asked for a break.

There was a beautiful sunset that evening. Sean and I got a great view as we waited for his scoot to cool down.

I would have preferred to have ridden WITH the rally all the way. It is nice, however, to know just what the Iron Buddy can do. I hope to make it to five more rallies in 2011, but I don't know if I will. I do know that I will attend the 20011 Fall Classic and I'll be looking forward to it.

By the way, here is the unedited video of the ride out, that wound up putting me at the back of the pack.


Ride on,

Howard

Wednesday, September 29, 2010

Pimping My Ride



I have just finished the biggest part of my Buddy's customization. I hadn't posted anything about it because....... uh, I don't know. I was wanting it to be secret, but I'm really not sure why. I guess I just wanted to be able to make a production out of the unveiling.


So, here's how it happened: I badly injured my Buddy a couple of months ago. I was changing variator weights (something which I've done a number of times in the past) and somehow managed to put the variator plate on a little crooked, or catawampus as we say back home. I tightened all the nuts and took off for a test drive. The plate seems to have straightened out. Probably when I hit a bump just right. This caused the formerly tight nut and variator plate, to be just a tiny bit loose, resulting in some wobbling, vibration and gawdawful noises coming from of the aforementioned variator plate.

I got the scooter shut down as soon as I could get off the road. Long story short, the variator plate welded itself (through the wonder of friction) to the crankshaft. I was unable to remove it, now were the fine folks at Scoot Over. So, through every fault of my own, I needed a new crankshaft and variator.



The crankshaft is not an expensive part, in itself, however (Ever notice how that word "however" frequently means that your bank account is about to be assaulted?) it takes a LOT of labor to get to it. The engine case must be split open, hence you spend one amount on the crankshaft and much more than that on labor.



Ron, the mechanic at Scoot Over, and I have discussed modifying my motor for more power and since the entire motor was about to have major vehicular surgery, we decided to do the modification and save me the cost of labor to open the engine case at another time.



Ron did a little research and presented me with several options:
  1. Upgrade to the 161cc motor. This is common for the 125cc scooters, but since I have a 150cc Buddy, it doesn't really give much increase for the money spent.
  2. Upgrade to the 171cc kit. This option is less common and for a bit more money for the kit, gives me a 21cc boost.
  3. Upgrade to the NCY 62mm cylinder kit. I had seen references made to this kit, but have never heard of anyone ever having installed it on their scooter. Hmmm, what might be a one-of-a-kind motor? I had to have it.

So began my journey. I had Ron order the kit. Additionally, I added the 61mm Big Valve Head and the new crank shaft.



After completing the Saddle Sore 1000, Iron Butt ride, we decided to start calling my Scooter "Iron Buddy." So, while Ron was rebuilding my scooter's power plant, I started thinking of how to make my scoot look Iron - esque. I have never liked the blue color of the St Tropez and early on had gotten some quotes to repaint it. A simple, one color paint job was about $400, but a two-tone metallic, mildly customized paint job was quoted to me at $3000! I can't afford custom paint work.


Shelby, at Scoot Over, referred me to Signs Now to look at a vinyl wrap. After looking a lot of images, my wife and I picked out a rusty, rivetted, steel plate graphic image. I had kind of a "Mad Max" meets "steam punk" in mind. After getting a sample printed out, I went to Scoot Over and held it up against the part of the Buddy that couldn't be wrapped. It didn't match at all, but Ron suggested that it would look good with the "Sunset Orange" Buddy body panels. It did.


"In for a penny, in for a pound" as the old saying goes, so I had Scoot Over order the new panels. Now the Buddy would have a "new" motor, new look panels on the front and rear and brand new panels in the middle.


There were some bumps in the road. The 183cc kit wouldn't just "bolt on." The cylinder had to be bored out to accommodate the new piston. That took a while. Sign Now had a printer go down and the other one run out of ink as well as a couple of high profile, high dollar jobs that put Iron Buddy on the back burner for a few days.


Finally, after a bit more than a month, all the parts were in place. Scoot Over was kind enough to let me keep Buddy in their garage and provided with the tools and expertise required to put Iron Buddy back together. Unlike Humpty Dumpty, this was going back together again!


It took about 10 hours, but I did it. Naturally, the first thing I did was to ride over the the GGR scooter club garage to show him off. Then I got the cameras and took some stills and some video. I didn't just want to post a couple of still pics on Modern Buddy and Facebook, so I made a little movie. It's only the second movie I've ever made, but I think it gets the point a cross:

Am I done? Of course not. The wheels are still blue. I think I will just paint them for now, but I am going to look for custom wheels. Ron and I are also looking at a new carburetor.

Ride on,

Howard